dimensions: the front panel of the 1066 measures 45mm x 220mm (1.75" x 8.70")power requirements 24 volts D.C. at approximately 100 mA.
connections:
A input 0 degrees L external fader output
B input 180 degrees } mic M
C N } Switch (when fitted)
D P unbalanced output
E 24 volts- R output 0 degrees
F input 0 degrees S output center - tap
H input 180 degrees } line T output 180 degrees
J U 24 volts+
K external fader input V chassis
mic sensitivity in 5db steps range between -80 and -20
line sensitivity also in 5db steps range -20 to +10
treble control is continuously variable at 10kHz
mid range frequencies are continuously variable: 0.7, 1.2, 2.4, 3.6, 7.0 kHz
bass frequencies are continuously variable: 35, 60, 100, 220 Hz
no high pass filter
the EQ is switchable; in/out and there is a phase switch
